Installing the Telephony Modem
This chapter explains how to install a new Telephony Modem at a subscriber
site.
Requirements
Before performing the procedures in this chapter, verify the following:
•
•
•
List of materials
The Telephony Modem package contains the following items:
•
•
•
•
•
•
•
Tools and Materials
Make sure you have the following tools and materials before proceeding:
•
The subscriber name, address, new telephone number, and Telephony
Modem serial number
The accessibility of house wiring (cable, telephone, and power)
The Telephony Modem is provisioned at the headend
Telephony Modem
Zero, one, or two Li-Ion battery packs (battery backup models only)
Power cord
CD containing USB drivers and this manual
Quick Start Guide, Initial Battery Installation Guide (battery backup
models only), Product Safety and Conformance Guide, and Wall
Mounting Template and Instructions
Ethernet and USB cables
Two #6 screws
For wall mounting on drywall:
— a drill with a 1/4 inch (6 mm) drill bit
— spectrum analyzer for checking RF levels (optional)
— two 1.5 inch (35mm or 40mm) drywall anchors and screws; the head
should be less than 9.1 mm (0.36 inches) diameter and less than 3.3
mm (0.13 inches) thick
Telephony Modem Installation Guide Release 4 Standard 3.0 Aug 2004
2-1
2-