Intellisystem IT-900-IPC Series User Manual page 96

d. Before connect test leads across two sides of the capacitor under measurement, be sure that the
capacitor has been discharged fully.
Note:
a. The capacitance of a capacitor should be tested separately, should not test in
the installation of circuit.
b. To avoid electric shock, be sure the capacitors have been discharged fully before measuring the ca
pacitance of a capacitor.
c.
While testing the capacitance of a capacitor to
660uF, the Max time will be 6.6 seconds, if the capacitor is leaked or damaged,
the data can't be read. The tester will be normal after disconnecting the capacitor.
Manual range and Auto range
When testing, click "Range select" to change the value, click "Auto range "to enter Auto
measurement.
 6.600μF range
0.000uF
 66.00μF range
00.00uF
 660.0μF range
000.0uF

0.000mF 6.600mF range

00.00mF 66.00mF range
91