Table of Contents
Advertisement
65
（2）PING Test
PING is the most conventional network debugging tool; it is used for testing if the connected IP camera
or other network equipment's Ethernet port is working normally and the IP address is correct.
Connect a network cable to the LAN port and click the
icon to open the PING tool. You can set
your LOCAL (native) IP address, Remote IP address (e.g. IP camera), Packet count, Packet Size, Packet
time and Timeout. Press "Start" to start pinging. If the IP camera or network device is not configured
properly or not plugged in, it will say "Destination host unreachable," or have 100% packet loss. If the
tester connects to the device, the send and receive packets will have a 0% packet loss.
Advertisement
Table of Contents
Need help?
Do you have a question about the IT-900-IPC Series and is the answer not in the manual?