Intellisystem IT-900-IPC Series User Manual page 61

The PTZ address in the tester must be consistent with the dome camera or decoder, then the IPC
tester can test .After setting the parameter, the tester can control the PTZ and lens.
To control PTZ by screen touch:
Tap left, right, upward and downward on the touch screen to control the PTZ rotation direction, PTZ
cameras will rotate accordingly. By two fingers move outward and inward on the touch screen to zoom
in and out the PTZ.
To control PTZ by key buttons
Press the key
Press the key or
Press the key or
Press the key or
control the PTZ direction of rotation
, to switch on or turn off the aperture.
, adjust the focus manually
, manually adjust the zoom
56