Intellisystem IT-900-IPC Series User Manual page 27

then default use the modified password to log in.
If you select ONVIF Rapid mode, the meter automatically scan different network segments for ONVIF
cameras. It lists the camera name and IP address on the Device List. Tester can auto login camera and
display camera image.
22
Click the button "Refresh", tester will scan the ONVIF camera again. Click the newly displayed ONVIF
camera on the "Device List". The tester will show the IP camera's relative information and settings.
Activate HIKVISION Camera: When connected inactivated HIKVISION Camera, tester can auto
recognized, And prompt "The camera is not active, you need to activate it", click "OK" to start activate.