System Info; Test Pattern; Function Key; Marker - Ikegami HMM-1850 Operation Manual

System Info

- Used to control all additional updates
Firmware Version displays current firmware version
FPGA Version displays current FPGA version
H Flip
- Used to reverse the display image horizontally
[ On, Off ]
*remark: OSD also flips which gives difficulty to read OSD menu

Test Pattern

- Used to generate internal test patters
- turn the main knob to select a test pattern in preference
- press the jog for two seconds to exit the test pattern

Function Key

- All front function keys are programmable with any features that are included in the monitor
- Only one feature can be assigned per one function key
Function Key 1
[
Function Key 2
Vectorscope, H/V Delay, SDI Output, HDMI Output,
Function Key 3
Center Marker, Safety Area, Audio Level Meter,
Function Key 4
Timecode, Max Bright, Aspect,
Function Key 5 Mode, Still, Focus Assist, DSLR Scale, YPBPR, SDI ]
Function Key 6
Function Key 7
Function Key 8

Marker

- Used to activate marker feature
market type selection
Marker Type
[ Off, 16:9, 4:3, 15:9, 14:9, 13:9, 1.85:1, 2.35:1 ]
select input of the safety resolution rate
Safety Area
[ Off, 95%, 93%, 90%, 88%, 85%, 80%, EBU Action, EBU Graphic ]
Center Marker On / Off Center Marker
Advanced (cont'd)
Main Advanced
Main Advanced
Main Advanced
Function key
Main Function Key
Blue/ mono, HDMI, UMD
Marker
Main Marker
System Info
H Flip
Test Pattern
Type, Waveform,
HDMI CSC, Zoom