Down Information; Initialization Complete - Toshiba nv Series Instruction Manual

Chapter 7 Application Interface
7.2.8

Down information

The down information contains the reason why the FL-net module entered the ERR
mode.
0x0010
0x0020
0x0030
0x0080
0x0090
0x0160
0x0260
0x0261
0x0262
0x0263
0x0264
0x0600
0x0601
0x0700
0x0800
0x0900
0x0A07
7.2.9

Initialization complete

'0x0000' is set when the initialization of the FL-net module starts. '0x0001' is set
when the initialization is complete.
68
6F8C1375
b15
0x082
Table 7-18 Down information

Down information

External WDT error
Bus stall
General exception occurred
Power interruption detection
FC_ECC error
ROM area check error
RAM area check error
Program area check error
SRAM parity error detected
Module type error
HW revision error
Overlapping node number
detected
FL network subscription error
Node number error
Protocol version mismatch
Format error
Cyclic area assignment error
b15
0x084
Down information
Description
NMI occurred due to external WDT.
NMI occurred due to bus stall.
General exception occurred.
NMI occurred due to power interruption detection.
NMI occurred due to an FX_ECC error.
An error was detected in a BCC check of FROM
upon initialization.
An error was detected in a RAM check upon
initialization.
An error was detected in a BCC check of the
SRAM program area upon initialization or during
operation.
NMI occurred due to a SRAM parity error
detected.
The module type is not FL911.
The value of the HW revision is not valid.
Overlapping of node number was detected upon
network subscription.
An FL network subscription error was detected.
RSW is invalid (RSW＝0x00,0xFF).
FA link protocol version mismatch was detected.
FA link protocol parameter error was detected.
(Detected only for test operation)
Cyclic area assignment cannot be done.
Initialize complete
b0
b0