Inspection; Daily Inspection; Maintenance And - Toshiba nv Series Instruction Manual

Chapter 6 Maintenance and Inspection
6.1

Inspection

6.1.1

Daily inspection

For daily inspection, check the following.
Front panel
<LED>
Check if each of the LEDs is visible. If not, clean it with a soft cloth.
Be careful not to change the switch settings. Check the LED state from the front
side.
<FL-net connector>
Check the following:
 The cable is connected correctly.
 Cable connection is normal.
 The modular connector is locked.
 Cable connection is not loose or has an abnormal appearance.
If any abnormality is found, contact one of Toshiba's service representatives.
44
6F8C1375
For safety, avoid touching the interior of the
WARNING
product.
It may cause an electric shock.
When touching the product for cleaning,
CAUTION
remove the static electricity from your body.
The static electricity accumulated in the human body may
cause failure of the product.
When cleaning the product, do not change
CAUTION
the switch setting.
Do not exert any stress on the cables.
Exerting stress on the cables by touching them may cause
malfunction or accidents.
Stop using immediately when an error
CAUTION
occurs.
When an error occurs such as unable to turn on the
power, stop using and contact one of Toshiba's service
representatives.
Mandatory
Mandatory
Prohibited
Mandatory