fantastic furniture Hamilton Queen bed Manual page 8

Step 7
You will need
Phillips head
4 x Bolts
screwdriver
(H2)
Attach Centre Rail (P4) to Bedhead (P1) and
Bedfoot (P2) screw with 4 x Bolts (H2). Tighten
with a Phillips Head Screwdriver.
Step 8
You will need
2 x Long Bolts
4 x Screws
(H3)
(H1)
2 x Hexagonal
2 x Washers
Nuts (H4) (H6)
Phillips head 1 x Spanner
screwdriver (H12)
Attach Article Bed Boards (P7x2) to Centre Rail (P4)
with 2 x Washers (H6), 2 x Long Bolts (H3) and 2 x
Hexagonal Nuts (H4) using Spanner (H12) and Phillips Head Screwdriver. Then screw
Article Bed Boards (P7x2) with 4 x Screws (H1). Move the bed in proper position
after adjusting the foot 5mm upwards. Once the bed is in correct position , please
rotate and adjust foot to the floor level.
fantasticfurniture.com.au
(P1)
(P4)
(P1)
(P7)
H1
H6
H1
(P3)
H1
H3
H3
H4
H6
(P7)
H4
H2
H2
(P2)
H3
H6
H4
H1
H12
(P3)
(P4)
(P2)
Page 8