fantastic furniture Hamilton Queen bed Manual page 31

Step 15
You will need
8 x Wedges 8 x Screws
(H12) (H13)
Phillips head
screwdriver
Secure Back Panels (P10) in place with 8 x Wedges (H12) using 8 x Screws (H13).
Step 16
You will need
4 x Cam Bolts
Phillips head
(H3)
screwdriver
Attach 4 x Cam Bolts (H3) to Drawer Front (P11) as shown.
Step 17
You will need
4 x Cam Nuts Flat head
(H4) screwdriver
Insert 4 x Cam Nuts (H4) into the holes of Drawer Sides (P12, P13).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Sides (P12, P13) into place and then tighten the cam nuts.
www.fantasticfurniture.com.au
(P1)
H3
H3
(P11)
(P12)
H4
H4
(P11)
(P10)
(P10)
Make sure Wedge (H12)
is facing to the bottom of
Top Panel (P1) as shown.
H3
H3
H12
H13
(P13)
H4
H4
PAGE 12