Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Hamilton Queen bed
Summary of Contents for fantastic furniture Hamilton Queen bed
- Page 1 Version 1.0 Hamilton Queen bed fantasticfurniture.com.au...
- Page 2 We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 2 fantasticfurniture.com.au...
- Page 3 Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly.
- Page 4 What you need to assemble the product Bedhead (P1) DO NOT USE Other tools you need: Phillips head screwdriver; Side Rail Centre Rail (P3) (P4) Support (P5) Support (P5) Support Side Rail (P3) (P5) Parts list Bedfoot Bedhead (P1); (P2) Bedfoot (P2);...
- Page 5 Step 1 You will need 8 x Screws 2 x Flat (H1) Connectors (H9) Phillips head screwdriver (P1) Attach 2 x Flat Connectors (H9) to Bedhead (P1) with 8 x Screws (H1) by tightening with the Phillips Head Screwdriver. Step 2 You will need 8 x Screws 2 x Flat...
- Page 6 Step 3 You will need 16 x Screws 4 x Elbow (H11) Connectors (H8) (P3) Phillips head screwdriver Attach 4 x Elbow Connectors (H8) to Side Panels (P3 x 2) with 16 x Screws (H11) by tightening with the Phillips Head Screwdriver. Step 4 You will need (P2)
- Page 7 Step 5 (P1) You will need 6 x Bolts 1 x Allen Key (H7) (H10) (P3) Two People (P3) Required Attach Side Panels (P3 x 2) to Bedhead (P1) with 6 x Bolts (H7) by tightening with 1 x Allen Key (H10). Step 6 You will need (P4)
- Page 8 Step 7 (P1) You will need Phillips head 4 x Bolts screwdriver (H2) (P4) (P2) Attach Centre Rail (P4) to Bedhead (P1) and Bedfoot (P2) screw with 4 x Bolts (H2). Tighten with a Phillips Head Screwdriver. Step 8 (P1) You will need 2 x Long Bolts 4 x Screws...
- Page 9 Step 9 You will need Phillips head 22 x Screws (H1) screwdriver (P3) (P3) Attach Article Bed Boards (P6 x 11) to Side Rails (P3 x 2) with 22 x Screws (H1). Tighten with a Phillips head screwdriver. Job Complete! In the interest of our environment please dispose of all packaging thoughtfully.
- Page 10 Assembly Instructions HAYMAN BEDSIDE 2 DRW VER 1.1...
- Page 12 What You Need To Assemble The Body Top Panel (P1) (Tools not provided) Flat BladeScrewdriver Phillips Head Screwdriver Mallet Right Side Rail Panel Back Panel (P12) (P3) (P6) Rail (P4) Left Side Rail Panel (P5) Right Drawer Back (P2) Drawer Side (P11) (P9) Drawer Base...
- Page 13 Step 1 You will need: 2 x CL Runner Tracks (H6) 6 x Small Screws (H5) 4 x Cam Bolts (H3) 4 x Dowels (H1) (P2) Attach 2 x CL Runner Tracks (H6) to Left Side Panel (P2) with 6 x Small Screws (H5). Insert 4 x Dowels (H1) into Left Side Panel (P2).
- Page 14 Step 3 (P5) You will need: Make sure the side with bigger holes is facing to Rail (P4). 4 x Cam Nuts (H4) (P12) (P4) This is how a cam nut works ..The head of the cam bolt goes into the open mouth of the cam nut.
- Page 15 Step 5 (P6) You will need: 4 x Cam Bolts (H3) (P3) (P2) (P1) Slide Back Panel (P6) into the groove of Left Side Panel (P2) and Right Side Panel (P3). Attach 4 x Cam Bolts (H3) into Top Panel (P1) as shown. Step 6 (P1) You will need:...
- Page 16 Step 7 (P1) You will need: 2 x Screws (P12) (H14) Attach Rail (P12) to Top panel (P1) with 2 x Long Screws (H14). Step 8 You will need: 4 x Wedges (H12) 4 x Screws (H13) Make sure Wedge (H12) is facing to the bottom of Top Panel (P1) as shown.
- Page 17 Step 9 You will need: 4 x Cam Bolts (H3) (P7) Attach 4 x Small Cam Bolts (H3) to Drawer Front (P7). Step 10 You will need: 1 x DL Runner (H8) 1 x DR Runner (H9) (P9) 4 x Small (P8) Screws (H5)
- Page 18 Step 12 (P10) (P8) (P9) (P7) Slide Drawer Base (P10) into the groove in Drawer Sides (P8) and (P9). Step 13 You will need: (P11) 4 x Medium Screws (H2) (P8) (P10) (P9) (P7) Attach Drawer Back (P11) to Drawer Sides (P8) and (P9) with 4 x Medium Screws (H2), make sure that the groove lines up the whole way around the drawer.
- Page 19 Step 15 Repeat Step 9 to Step 14 to assemble the other drawer. Then put the drawers into the chest. Please make sure your bedside is sitting squarely on the floor,then tighten all the screws and bolts – being careful not to over tighten The job is now complete! In the interest of our environment Please dispose of all packaging thoughtfully.
- Page 20 Version 1.0 HAYMAN Dresser 6 Drawer www.fantasticfurniture.com.au...
- Page 21 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...
- Page 22 Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.
- Page 23 What you need Top Panel to assemble the product (P1) Rail (P4) DO NOT USE Other tools you need 2 x Back Flat head screwdriver; Panels Phillips head screwdriver; (P10) Rail Right Side Rail (P5) Panel (P8) Divider (P3) (P7) Left Side Rail Panel...
- Page 24 Step 1 You will need 3 x CL Runner 3 x CR Runner Tracks (H6) Tracks (H7) 18 x Small Phillips head Screws (H5) screwdriver (P2) Attach 3 x CL Runner Tracks (H6) to Left Side Panel (P2) with 9 x Small Screws (H5). Attach 3 x CR Runner Tracks (H7) to Right Side Panel (P3) with 9 x Small Screws (H5).
- Page 25 Step 3 You will need 3 x CL Runner 9 x Small Tracks (H6) Screws (H5) 2 x Cam Bolts Phillips head (H3) screwdriver (P7) Attach 2 x Cam Bolts (H3) into Divider (P7) as shown. Attach 3 x CL Runner Tracks (H6) to Divider (P7) with 9 x Small Screws (H5). Step 4 You will need 3 x CR Runner...
- Page 26 Step 5 You will need (P7) (P4) 1 x Dowel 1 x Cam Bolt (H1) (H3) 1 x Cam Nut Phillips head (H4) screwdriver (P6) Flat head screwdriver Cam Nut hole This is how a cam nut works ..nearby bottom The head of the cam bolt goes into the open mouth of the cam nut.
- Page 27 Step 7 (P8) You will need H2 H2 (P9) 4 x Long Phillips head Screws (H2) screwdriver (P7) Attach Rails (P8, P9) to Divider (P7) with 4 x Long Screws (H2) using a Phillips head screwdriver. Step 8 You will need (P8) 8 x Cam Nuts 2 x Dowels...
- Page 28 Step 9 (P8) (P10) (P9) Put Back Panel (P10) into the grooves of Rail (P8) and Rail (P9). Step 10 (P2) You will need (P8) 8 x Cam Nuts 2 x Dowels (H4) (H1) (P9) Flat head screwdriver (P5) (P6) Insert 2 x Dowels (H1) into Left Side Panel (P2).
- Page 29 Step 11 (P10) (P3) (P2) TWO PEOPLE REQUIRED Carefully turn the dresser over to an upright position. Put Back Panel (P10) into the grooves of Side Panels (P2, P3) and Rail (P8). Step 12 You will need 6 x Cam Bolts Phillips head (H3) screwdriver...
- Page 30 Step 13 (P1) You will need 6 x Dowels 6 x Cam Nuts (H1) (H4) (P3) Flat head screwdriver (P2) Insert 6 x Dowels (H1) into the holes of Side Panels (P2, P3) and Divider (P7). Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2, P3) and Divider (P7). Rotate the cam nuts so the arrows point towards the incoming cam bolts.
- Page 31 Step 15 (P1) You will need 8 x Wedges 8 x Screws (P10) (H12) (H13) (P10) Phillips head screwdriver Make sure Wedge (H12) is facing to the bottom of Top Panel (P1) as shown. Secure Back Panels (P10) in place with 8 x Wedges (H12) using 8 x Screws (H13). Step 16 You will need (P11)
- Page 32 Step 18 (P14) (P12) (P13) Slide Drawer Base (P14) into the grooves in Drawer Sides (P12, P13). Step 19 (P15) You will need (P12) 4 x Long Phillips head Screws (H2) screwdriver (P13) Attach Drawer Back (P15) to Drawer Sides (P12, P13) with 4 x Long Screws (H2). Make sure that the groove lines up the whole way around the drawer.
- Page 33 Step 21 You will need (P11) 1 x Handle 1 x Bolt (H10) (H11) Phillips head Attach 1 x Handle (H10) to Drawer Front (P11) with 1 x Bolt (H11). screwdriver Step 22 Repeat Step 16 to Step 21 to assemble the other 5 drawers. Step 23 Put the drawers into the dresser.
- Page 34 We strongly advise that you use Step 24 the wall safety strap provided to prevent the unit toppling You will need 1 x Safety 1 x Screw Strap (H15) (H16) 1 x Washer Phillips head (H17) screwdriver 200mm 15mm 15mm Safety Strap Use 1 x Screw (H16) and 1 x Washer (H17) to attach 1 x Safety Strap (H15) securely on back bottom of top panel (P1) as shown.
- Page 35 Recommended weight capacity : 80KG. Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. www.fantasticfurniture.com.au PAGE 16...