Step 7
You will need
4 x Long
Phillips head
Screws (H2)
screwdriver
Attach Rails (P8, P9) to Divider (P7)
with 4 x Long Screws (H2) using a Phillips head screwdriver.
Step 8
You will need
8 x Cam Nuts
2 x Dowels
(H4)
(H1)
Flat head
screwdriver
(P3)
Insert 2 x Dowels (H1) into Right Side Panel (P3).
Insert 8 x Cam Nuts (H4) into the holes of Rails (P4, P5, P6, P8, P9).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Right Side Panel (P3) to the frame, then tighten the cam nuts.
www.fantasticfurniture.com.au
H2
H4 H4
H4
(P4)
H1
H1
H2
H2 H2
(P7)
H4
(P5)
H4
H4
(P6)
(P8)
(P9)
(P8)
(P9)
PAGE 8