fantastic furniture Hamilton Queen bed Manual page 14

Step 3
You will need:
4 x Cam Nuts
(H4)
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4 x Cam Nuts (H4) into the holes of
Rails (P4, P5) and (P12). Rotate the cam nuts so
the arrows point towards the incoming cam bolts.
Push Rails (P4, P5) and (P12) into place and tighten the cam nuts.
Step 4
You will need:
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
Insert 4 x Dowels (H1) into Rails (P4,P12).
Insert 4 x Cam Nuts (H4) into the holes of Rails (P4,P5) and (P12).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Right Side Panel (P3) into place and tighten the cam nuts.
Make sure the side with bigger holes
is facing to Rail (P4).
(P12)
H4
(P2)
H1 H1
H4
(P12)
(P2)
(P4)
H4
H4
(P3)
H4
H4
H1
H1
H4
(P4)
(P5)
H4
(P5)
Page 5