fantastic furniture Hamilton Queen bed Manual page 17

Step 9
You will need:
4 x Cam Bolts
(H3)
Attach 4 x Small Cam Bolts (H3) to Drawer Front (P7).
Step 10
You will need:
1 x DL Runner
(H8)
1 x DR Runner
(H9)
4 x Small
Screws
(H5)
Attach 1 x DL Runner (H8) to Left Drawer Side (P8) and 1 x DR Runner (H9) to
Right Drawer Side (P9) with 4 x Small Screws (H5).
Step 11
You will need:
4 x Cam Nuts
(H4)
Insert 4 x Cam Nuts (H4) into the holes of Drawer Sides (P8) and (P9).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Sides (P8) and (P9) into place and tighten the cam nuts.
H3
(P7)
H5
(P8)
(P8)
H4
H4
(P7)
H3
H3
H5
H5
H8
(P9)
H3
H5
H9
(P9)
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H4
H4
Page 8