Inserting The Chassis Into The Rack - Cisco UCS X9508 Installation Manual

Inserting the Chassis into the Rack

1
3
c) Using a #2 Phillips-head screwdriver, secure the cable ground bracket and bottom cable management arms to the
server chassis by tightening the captive screws.
Inserting the Chassis into the Rack
Before you begin
If you have not already verified that the rails are installed as indicated in the front and rear layouts, do so now.
See Rail Installation Layout, on page
Also, make sure to review
19.
The chassis must be grounded by a ground lug that Cisco provides, or an equivalent. See "Ground Lug" in
Earth Ground Considerations, on page
Caution
Before beginning this procedure, make sure that the rails are correctly installed, and all the rail kits' mounting
screws are installed and tightened.
Cisco UCS X9508 Server Chassis Installation Guide
40
Threaded Standoffs
Captive Screws
35.
Installation Notes and Warnings for the Cisco UCS X9508 Server Chassis, on page
21.
2 Ground Bracket, long side aligned
with standoffs
Installation