Inserting the Chassis into the Rack
Step 5
Follow the same procedure to install the other rack rail as shown below.
Figure 29: Round Hole Adapter and Rails Installed in a Rack
Step 6
Use a tape measure and level to verify that both rack rails are horizontal and at the same height.
Step 7
Remove all power supplies, fan assemblies, server blades, and I/O modules to lighten the chassis. Even with
devices removed, the chassis weighs 90 lbs (40.83 kg).
Inserting the Chassis into the Rack
Procedure
Step 1
With the help of another person (or special lifting equipment), lift the chassis and place it on the mounting
rail as shown.
Figure 30: Mounting Rail Weight Distribution (Square Hole Mount Shown)
NON-WEIGHT BEARING SURFACE-
CHASSIS SHOULD NOT BE RIDING
ON THIS SURFACE
Cisco UCS 5108 Server Chassis Installation Guide
52
Weight bearing surface.
Chassis should be riding
on this surface.
Installation