Removing The Cable Management Tray - Cisco UCS X9508 Installation Manual

Installation
Step 4 Attach any IFM cables as needed.

Removing the Cable Management Tray

Use the following procedure to remove the cable management tray(s).
Step 1
(Optional) Remove or lift the cables to allow easier access to the cable management tray.
Step 2 Detach the cable management tray from the chassis.
a) At each corner of the cable management tray, apply equal pressure to slide the tray upward in the chassis notch until
it can no longer slide up.
Removing the Cable Management Tray
Cisco UCS X9508 Server Chassis Installation Guide
53