Table of Contents
Advertisement
Installing and Removing Components
This chapter describes how to remove components from the chassis and how to install components into the
chassis. This section contains the following section:
•
•
•
•
•
•
•
•
•
•
•
Components
The following figure shows an empty Cisco UCS X9508 server chassis and identifies the front, back, and
module slots.
Note
Before you remove or install components, please ensure that all software applications are shutdown and
management software is in a good state.
Note
Whenever you remove a module from the chassis for an extended period of time, always replace the module
with the appropriate blank panel. Failing to do so can result in heating and EMI issues. Blank panels can be
ordered from Cisco Systems.
Components, on page 57
Installing and Removing a Compute Node Blank, on page 63
Installing and Removing a Compute Node, on page 67
Installing and Removing Power Supplies, on page 70
Replacing a PSU Blank, on page 73
Replacing the PSU Keying Bracket, on page 76
Replacing the Power Entry Modules (PEMs), on page 79
Installing and Removing a Fan Module, on page 84
Installing and Removing a Rear Module's Fan, on page 87
Recycling Printed Circuit Boards, on page 93
3
C H A P T E R
Cisco UCS X9508 Server Chassis Installation Guide
57
Hide quick links:
Advertisement
Table of Contents
