Product Overview; Product Introduction - Maiwe MIEN2216 User Manual

MIEN2216/18/20&MIEN6216/18/20 Industrial Ethernet Switch

1. Product Overview

1.1. Product Introduction

Wuhan Maiwe Communication Co.,Ltd network management type 100M
industrial switch, is an industrial Ethernet switch designed and developed for
industrial high-speed communication network applications. This managed
switch provides a high-end industrial Ethernet communication solution for
flexible industrial applications, making industrial communication smoother,
more reliable and faster, meeting the needs of customers for innovative
applications for value-added applications.
Wuhan Maiwe Communication Co.,Ltd network management series
switches can be used for simple application in plug-and-play mode, and can
also be used in complex network management applications to meet the needs
of users. All electrical ports support auto-negotiation, 10/100Mbps full-duplex
and half-duplex, flow control, Auto-MDI/ MDI-X and more. Through the web
network management or SNMP network management, the switches provide
advanced management functions such as Mwring, virtual LAN, trunk, quality of
service, IGMP snooping, rate control, port mirroring, static MAC address
forwarding table, and diagnostic functions. A series of common advanced
management functions such as Email/Relay fault alarm and firmware online
upgrade. Wuhan Maiwe Communication Co.,Ltd network management series
switches provide redundant power supply support, which can provide a wide
range of DC or AC power input at the same time. In terms of structural
installation, Wuhan Maiwe Communication Co.,Ltd is a compact switch that
takes up less space and is installed with a rail.
Mwring technology is designed and developed by Wuhan Maiwe
Communication Co.,Ltd for industrial applications. It provides self-recovery
function after the Ethernet communication link is disconnected, and its
recovery time is less than 20 milliseconds. Maiwe network management series
switches can use ordinary 100 Mbps ports to provide faster recovery rate and
communication bandwidth. Mwring technology provides an Ethernet network
for link redundancy backup.
MIEN6216/18/20 series network management type 100M industrial
Ethernet switches have 16 10/100Base-Tx ports and 0/2/4 100Base-FX single
mode/multimode fiber interfaces. This product supports 802.1Q VLANs and
supports port speed limit of 64K in steps. The backplane bandwidth is 8.8G
and supports MAC address tables of 8K entries.
- 1 -