Table of Contents
Advertisement
MIEN2216/18/20&MIEN6216/18/20 Industrial Ethernet Switch
whether there is enough space .
Checking DIN-Rail whether suitable for power input.
Please selected the correct position. As below behind picture shows:
Insert DIN-Rail into DIN-Rail slot and as schematics 2-1 shows turning
equipment.
As schematics 2-1 shows, insert DIN-rail into DIN-Rail slot and confirm the
switch reliable equipment installed on the DIN-rail.
3.2.2. Cable connection
After the correct installation, the cable can be installed and connected,
mainly including the following interfaces cable connection.
Copper port
The 100M copperl port of the terminal equipment provided by this product
is a 10Base-T/100Base-TX Ethernet RJ45 interface. Using a straight-through
network cable to connect to the terminal device, and a crossover network cable
to connect to the network device.
Connecting the network management port
The CONSOLE port of this product can be connected to the serial port of
the control computer.
Connect power
When all other cables are connected, you can connect to the power supply
of the product identification specification.
3.2.3. Fiber connection
The Gigabit optical port of this product is a 1000Base-LX full-duplex
single-mode/multi-mode fiber connection port, using SFP hot-swappable
components, optical fiber interface using LC interface.
Attention：
- 12 -
Advertisement
Table of Contents
