Sip Account Settings - Escene ES205 User Manual

3.4 SIP Account Settings

ES205 IP phone makes calls based on sip accounts, It can support Single account or Multi-account,
Each account can be configured to the different SIP server.
If you want to...
Create an SIP account
Disable sip account
Escene Communication
--1) Select "System setting" > "Advanced setting"；
--2) Enter the password required（The default is empty) ；
--3) Select "SIP" > "Account sip"；
--4) Select one of the account you want to setting, you can configure
the following parameters
-Enable account*: Select Enable
-Number of lines: Default is 2
-Description: description of this account
-Display Name: The name displayed on the screen
-Authentication user: the Authenticated users are matched with
the SIP server.(The default With the same account)
-Account*: the account matches with the SIP server.(extension
number)
-User pass word*: the user password matches with the SIP server
-SIP Server*: The primary SIP server, all calls through this server
-Out Bound Server: The out bound SIP server
-STUN Type: Enable/Disable STUN feature
-STUN: Input STUN URL
-Auto Answer: Enable/Disable this account auto answer feature
* Note: When you finish the setting, you can press Save to make it
work, and then you can see the status icon in the LCD idle.
The parameters with the * mark must be set.
--1) Select "System setting" > "Advanced setting"；
--2) Enter the password required（The default is empty) ；
--3) Select "SIP" > "Account sip"；
Then...
www.escene.cn/en/