Verizon Fota (Firmware Over The Air); Verifying Signal Strength - Multitech MultiConnect microCell User Manual

Verizon FOTA (Firmware Over the Air)

At times, your device may require a critical update to radio firmware for devices connecting to the network. To
stay compliant to Verizon's LTE requirements, you must implement FOTA. Failure to perform a critical update could
result in losing access to the Verizon network.
MultiTech has developed a script for customers to use in order to initiate a FOTA update from the (the customer's)
local host processor (pull FOTA). The script is available at:

Verifying Signal Strength

To verify the device signal strength, enter:
AT+CSQ
The command indicates signal quality, in the form:
+CSQ: <rssi>,<sq>
Where:
<rssi>
0
1
2-30
31
99
<sq>
0
1
2
3
4
5
6
7
99
Note: Signal strength of 10 or higher is needed for successful packet data sessions.
®
MultiConnect microCell MTCM-LNA3 User Guide
Received signal strength indication.
(-113) dBm or less
(-111) dBm
(-109) dBm - (-53) dBm / 2 dBm per step
(-51) dBm or greater
Not known or not detectable
LTE - RSRQ (in dBm):
-4 to -3
-6 to -5
-8 to -7
-10 to -9
-13 to -11
-15 to -14
-17 to -16
-19 to -18
Not known or not detectable
CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
https://www.multitech.com/vzw-catm1
17