ICP DAS USA tGW-700 Series User Manual page 35

Tiny Modbus/TCP to RTU/ASCII Gateway
The following is an overview of the parameters contained in the IP Address Selection section:
Item
Static IP: If no DHCP server is installed on the network, the network settings can be
configured manually. Refer to
Address Type
DHCP: The Dynamic Host Configuration Protocol (DHCP) is a network application protocol
that automatically assigns an IP address to each device. Refer to
Configuration"
Each tGW-700 connected to the network must have its own unique IP address. This
Static IP Address
parameter is used to assign a specific IP address.
This parameter is used to assign the subnet mask for the tGW-700. The subnet mask
Subnet Mask
indicates which portion of the IP address is used to identify the local network or subnet.
This parameter is used to assign the IP Address of the Gateway to be used by the tGW-700. A
Default Gateway
Gateway (or router) is a device that is used to connect an individual network to one or more
additional networks.
This parameter is used to set a user-defined MAC address, which must be in the format
MAC Address
FF-FF-FF-FF-FF-FF.
Update Settings
Click this button to save the revised settings to the tGW-700.
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
Description
Section "Manual Configuration"
for more details.
for more details.
Section "Dynamic
- 35 -