Table of Contents
Advertisement
6. ASSEMBLING THE SIDE SHELF
Parts Required:
Side Shelf (#12)
1
x
Tool Hook (#14)
4
x
Side Shelf Handle (#13)
1
x
Bottle Opener (#18)
1
x
Installation:
•
Turn the side shelf upside down. On the edge of the side shelf with four
holes, install the tool hooks into each hole along the edge. Tool hooks
will secure to the self-clinching nut that is pre-mounted on the inside.
•
Next, remove the pre-mounted screws from the side shelf handle. On the
short side with two holes, hand-tighten the screw (from the inside) into
the handle. Repeat for the other end of the handle. Note illustration 6A.
•
Last, remove the two pre-mounted screws for the bottle opener, and
re-install on the corner of the side shelf. Note illustration 6B.
7. MOUNTING THE SIDE SHELF
Installation:
•
Remove the four pre-mounted screws from the side of the main barrel.
•
From underneath, secure the side shelf to the side panel of the main
barrel using the four screws previously removed.
NOTE: Do not tighten any screws completely until all screws have
been installed. Once all screws are installed, then tighten securely.
IMPORTANT: Avoid using the side shelves to move or lift the grill.
The weight of the unit will cause the side shelf to break, which is not
covered by warranty.
8. INSTALLING THE THERMOMETER
Parts Required:
Thermometer Kit (#6)
1
x
Installation:
•
Remove the pre-installed nut from the thermometer.
•
Insert the thermometer into the hole provided on the top of the lid on
the main barrel, then secure by re-installing the nut from the inside.
Rotate the thermometer so the text is level and upright.
NOTE: If rotation is askew, this will result in incorrect readings.
6A
6B
7
8
9
Hide quick links:
Advertisement
Table of Contents
