Pit Boss RANCHER XL PB1000R1 Assembly And Operation Instructions Manual page 22

Flashing Grill Temperature Is
Temperature on Below 65°C /150°F
LCD Screen
Grill will not Insufficient Air Flow
achieve or Through Burn Pot
maintain stable
temperature
Insufficient Or
Poor Fuel
Grill Temperature
Probe
Grill produces Grease Build-Up
excess or
Wood Pellet Quality
discolored smoke
Burn Pot Is Blocked
Frequent Flare-Ups Cooking Temperature
22
This is not an error that effects the grill; however, it is used to show that there is some risk
that the fire could go out. Check hopper for sufficient fuel or if there is an obstruction in
the feed system. Remove pellets and follow Care and Maintenance instructions. Check
grill temperature probe. Follow Care and Maintenance instructions if dirty. Check burn
pot for ash build-up or obstructions. Follow Care and Maintenance instructions for ash
build-up. Check fan. Ensure it is working properly and air intake is not blocked. Follow Care
and Maintenance instructions if dirty. Check auger motor to confirm operation, and ensure
there is no blockage in the auger tube.
Check burn pot for ash build-up or obstructions. Follow Care and Maintenance instructions
for ash build-up. Check fan. Ensure it is working properly and air intake is not blocked.
Follow Care and Maintenance instructions if dirty. Check auger motor to confirm
operation, and ensure there is no blockage in the auger tube. Once all the above steps have
been done, start the grill, set temperature to Smoke and wait for 10 minutes. Check that the
flame produced is bright and vibrant.
Check hopper for sufficient fuel or if there is an obstruction in the feed system. Remove
pellets and follow Care and Maintenance instructions.
Check grill probe. Follow Care and Maintenance instructions if dirty.
Follow Care and Maintenance instructions.
Remove moist wood pellets from hopper. Follow Care and Maintenance instructions to
clean out. Replace with dry wood pellets.
Clear burn pot of moist wood pellets. Follow Hopper Priming Procedure.
Attempt cooking at a lower temperature. Grease does have a flash point. Keep the
temperature under 176°C / 350°F when cooking highly greasy food.