Table of Contents
Advertisement
CHPA S
ERIES
Table B-3. Front Panel Categories (continued)
Category Name
Time/Date Set
Remote Interface Parameters
Computer Interface (CIF)
Parameters
Controller Software Version
Elapsed Hours
Flash Programming Access
Code
Table B-3 Note:
* Only available once the Factory Authorized Access Code has been entered.
** Available in FAAM and unit in Standby.
B-10
Purpose
User Set Heater Time Delay
12/24 Hour Format
Hour:Minute
Set Month
Mode (If RMTPNL is displayed, the other selections under this menu
will not be available.)
-Device Address
-Baud
-Parity
-Protocol
-Check Byte Type
-Device Address
-Baud
-Parity
-Protocol
-Check Byte Type
-Beam On Elapsed Time Meter
-Heater Elapsed Time Meter
THIS DOCUMENT IS THE PROPERTY OF COMMUNICATIONS & POWER INDUSTRIES.
REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED
Date
Year
US Daylight Savings
-CR Enable
-LF Enable
-Accept Bad Check Byte
-Loopback Test
-Installation Test
-CR Enable
-LF Enable
-Accept Bad Check Byte
-Loopback Test
-Installation Test
D
.01023245 R
OC
.R
EV
Advertisement
Table of Contents
