Table of Contents
Advertisement
The following lists correlates UA QACs and FA QACs with menu categories and functions.
User Authorized Quick Access Codes (00-49)
00 RF Output Setting
01 Attenuator Setting
02 RF Power Mode
03 RF Inhibit
04 Suppress Peak Mode
05 Not used
06 Linearizer Control (if installed)
07 High RF Alarm
08 High RF Fault
09 Low RF Alarm
10 Low RF Fault
11 High Reflected RF Fault
Factory Authorized Quick Access Codes (50-99) are only accessible once the Factory Authorized
Access Code (FAAC) has been entered. See previous description of the FAAC.
50 Helix Over Voltage Fault
51 Helix Under Voltage Fault
52 Helix Average Over Current Fault
53 Helix Voltage Detected in Standby
D
.01023245 R
.R
OC
EV
THIS DOCUMENT IS THE PROPERTY OF COMMUNICATIONS & POWER INDUSTRIES.
REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED
12 Low RF Relay Preference
13 Fault Relay Preference
14 Fault Log
15 Factory Authorized Access Code
16 Lamp Test
17 Time/Date Set
18 Remote Interface Parameters
19 CIF Parameters
20 Controller Software Version
21 Heater Elapsed Time Meter
22 Beam On Elapsed Time Meter
54 CHPA HVPS Test Mode
55 Reset Heater Elapsed Time Meter
56 Reset Beam On Elapsed Time Meter
CHPA S
ERIES
5-13
Advertisement
Table of Contents
