Table 3-13. Fault And Miscellaneous Status (Continued); Table 3-14. Information/Error Messages - CPI 0102324500rR Manual

Table 3-13. Fault and Miscellaneous Status (continued)

Byte Bit Bit Definition
4 7(MSB) Parity
6 Complement of bit 5
5 RF Inhibit—Switch Port
4 RF Inhibit—External Interlock
3 RF Inhibit—CIF
2 RF Inhibit—Local
1 RF Inhibit—Remote Panel
0(LSB) Not used
Table 3-13 Note:
*Bit is set for the fault condition.

Table 3-14. Information/Error Messages

(Response is port sensitive and will reflect the status of the port [Remote or CIF] queried.)
Byte Bit Bit Definition (set if condition exists since last query)
1 7(MSB) Parity
6 Complement of bit 5
5 Control of the CHPA has been given to the computer interface.
4 Control of the CHPA has been lost by the computer interface.
3 An illegal or bad character has been received by CIF.
2 A CIF response message was interrupted because activity was detected on the CIF
port.
1 Not used
0(LSB) Not used
D .01023245 R .R
OC EV
THIS DOCUMENT IS THE PROPERTY OF COMMUNICATIONS & POWER INDUSTRIES.
REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED
CHPA S
ERIES
3-19