5.3
Changing Filters in the Filter Wheel
The filter wheel can hold up to 6, 25mm filters; these are held in position using the standard Prior
locking ring.
Changing a Filter:
Equipment required: Lumen200Pro, Filter, Prior Filter block tool, flat head screw driver.
1. Disconnect the Lumen from mains power and from the controller.
2. Ensure the unit has been allowed to cool for 30mins.
3. Place the unit on a flat surface with empty space in front of the unit.
4. Unscrew the 3 screws as indicated in Fig. 32
Fig 32 – The Lumen200
L u m e n 2 0 0 / S / P r o
™
Fixing Screws
41