Table of Contents
Advertisement
HD / SD Recorder
Menu Overview and Menu Navigation
Your HDR unit is a menu driven unit; there are several menus which are used to initially set up the unit. The
menu settings are non-volatile, so they are stored even when the unit is switched off. Many of these settings,
such as file type and bit rate, may only need to be set once. We will look at each menu in more detail, but
here is a quick overview of them.
MAIN MENU
TOOL
ERASE THIS BIN
FORMAT MEDIA
UPDATE FIRMWARE
UNLOCK MEDIA
FIRMWARE REVISION
SETUP
RECORD SETUP
PLAY SETUP
SYSTEM SETUP
SAVE SETUP
RECALL SETUP
STATUS
LCD displays current recording bit rate and video format
The following front panel buttons are used to navigate the displayed menus and to change settings.
Menu button also acts as an exit button.
Press the Menu button once to exit the current option selection.
Press the Menu button again to exit the current menu level.
If there are no higher level menus then you will return to the Clip Status Display.
SUB MENUS
Erases the currently selected recording bin.
Erases the whole contents of the drive and reformats it.
See
Removes the write protection from the HE-3 drive.
Displays the current firmware detail.
See
See
See
Menu Button.
This calls up the Menu Display which is navigated using the
Previous and Next Buttons.
Previous / Next Buttons.
These buttons navigate between menu options or allow you to
choose an option value. A selected option will be confirmed by an
asterisk [*] character next to it. Chosen settings are also confirmed in
the status menu.
page 25
for further details on the update process.
page 14
for further details
page 19
for further details
page 20
for further details
13
HDR-60
Advertisement
Table of Contents
