Table of Contents
Advertisement
HD / SD Recorder
Switching the recorder On
Ensure the HDR-60 power supply is connected to the rear panel of the recorder and a HE-3 removable
drive enclosure is fitted and locked in place.
The HDR-60 has a power ON/OFF switch which is located on the rear panel. To turn the unit ON
depress the dot side of this switch.
If the unit is already switched ON at the rear panel but has not started it may be in standby mode. Press
the Power button on the front panel and LCD display should now become backlit.
Formatting a drive before first use
New HE-3 drive enclosures, as described on
first use. The recorder's LCD panel will display options as follows.
1. The drive is checked by the unit.
3. Confirm the FORMAT option.
LCD Clip Status Display explained
1. Current Bin and Clip.
2. Loop playback indicator
If not present feature is OFF.
3. Remaining recording space in Hours
and Minutes.
4. Length of video within current Bin
[HH:MM:SS].
Rear Panel On / Off switch
Switches the power On / Off.
Front Panel Power button
Places the unit in standby mode or soft starts the unit.
page
8, will need to be formatted in the recorder before
12
HDR-60
2. Choose the FORMAT option.
4. The drive is now being made ready for
first use.
5. Current Time Code [HH:MM:SS:FF]
6. Function of left hand soft key.
7. Function of right hand soft key.
8. Record, Pause, STOP, FFWD,
FREV and Playback indicator.
Advertisement
Table of Contents
