Pro-Form CARBON EL User Manual page 15

17. Orient the Right Arm Front and Rear Covers
(65, 66) around the Right Upper Body Leg
(60) as shown, and then attach them with two
M4 x 16mm Screws (101).
Repeat this step on the other side of the
elliptical.
18. Make sure that all parts are properly
tightened. Extra parts may be included. Place a
mat beneath the elliptical to protect the floor.
Plug the Power Adapter (119) into the receptacle
on the front of the elliptical.
Then, plug the Power Adapter (119) into an
outlet (see HOW TO PLUG IN THE POWER
ADAPTER on page 17).
17
18
15
101
65
60
66
119