Hardware Installation; Setup Through The Web Interface - Vidicode V-Tap ISDN PRI Quick Manual

Quick Guide for the V-Tap ISDN PRI
• Connect the ISDN-30 Trunk-side to the IN/TRUNK port.
• Connect the ISDN-30 PBX-side to the OUT/PBX port.
• NOTE: Another way of connecting (parallel) is described in the V-Tap ISDN PRI manual.
• Optionally connect the network to the LAN port for web access and/or Tunnel function.
• Insert an SD card into the V-Tap to store the recordings on.
• Connect the USB of the V-Tap to the adapter for power supply.
• When using a LAN cable, there are 3 ways to access the web interface:
1) Setup your PC to reach the IP address 192.168.55.66 and enter this in your browser.
2) Enter an IP address on the first line of the text file "IP.TXT", put this file onto an SD
card and insert the card into the V-Tap.
3) Enable DHCP temporary by pressing the button for 1 second.
• When Wi-Fi is available and enabled on the V-Tap, search on your mobile phone or
laptop for the name "V-Tap...", connect to it using the 12 digits MAC address for the
Wi-Fi password, found on the bottom of the unit. Then open a browser and enter
the IP address 192.168.55.66.
Default IP address:
Default User name:
Default Password:
Default Wi-Fi Password:
After login, the settings page appears. For a detailed description of the above
possibilities and of all the settings, see the V-Tap ISDN PRI manual.
V1.1

HARDWARE INSTALLATION

SETUP THROUGH THE WEB INTERFACE

192.168.55.66
admin
admin
000349xxxxxx [12 digits MAC address]
© 2018 Vidicode 2