Kohler KD62V12 Operation And Maintenance Manual page 79

Operation and Maintenance Manual
Component
Engine oil change
with lube Oil "Cate-
gory 2" (2)
SL121
Engine oil change
with lube Oil "Cate-
gory 3" (2)
Engine oil filters
standard - main
SL101
bearing with lube oil
"Category 3"
Engine oil filters
SL101 standard - oil
bis cooling jet with lube
oil "Category 3"
Centrifugal oil filter -
SL102
paper filter
Engine oil change
with lube oil "Cate-
gory 2" (2)
SL121
Engine oil change
with lube oil "Cate-
gory 3" (2)
SL105 Fuel main filter
KD62V12 33521030301_6_1 EN_US
2019-02
Service
Schedule
Type
250 2Y X
500 2Y X
With Centrifuge
500 2Y X
500 2Y X
500 2Y X
250 2Y X
500 2Y X
1000 2Y X
© 2019 by Kohler Co. All rights reserved.
Task description
Oil Change Maximum Interval. Note : Replace Diesel
engine oil at least every 2 years. Final lube oil interval
depends on exchange interval factor according to
lube oil category and fuel sulfur rate. 0<fuel sulfur
rate<0.5%: the factor is 1 (no change on the lube oil
change interval). 0.5<fuel Sulfur rate<1%: the factor
is 1/2 (reduce by 2 times the lube oil change interval
and use only lube oil category 2 or 3). 1<fuel sulfur
rate <1.5%: requires additional approval. No oil Cate-
gory 1 in case of K175.
5.7.6 Changing Diesel engine oil — SL101,
SL101bis, SL121, page 107)
Replace filters. Clean the seal area before removal
the old filter to prevent oil contamination.
information see: 5.7.6 Changing Diesel engine oil —
SL101, SL101bis, SL121, page 107)
Replace filters. Clean the seal area before removal
the old filter to prevent oil contamination.
information see: 5.7.6 Changing Diesel engine oil —
SL101, SL101bis, SL121, page 107)
Replace the paper (sleeve) for sludge at each oil
change. Measure and record thickness of the sludge
accumulated on paper if above limits. Reduce lube oil
interval if the sludge accumulated is above limits.
(For more information see: 5.7.5 Replacing centrifuge
paper filter — SL102, page 104)
Oil Change Maximum Interval. Note : Replace Diesel
engine oil at least every 2 years. Final lube oil interval
depends on exchange interval factor according to
lube oil category and fuel sulfur rate. 0<fuel sulfur
rate<0.5%: the factor is 1 (no change on the lube oil
change interval). 0.5<fuel Sulfur rate<1%: the factor
is 1/2 (reduce by 2 times the lube oil change interval
and use only lube oil category 2 or 3). 1<fuel sulfur
rate <1.5%: requires additional approval. No oil Cate-
gory 1 in case of K175.
5.7.6 Changing Diesel engine oil — SL101,
SL101bis, SL121, page 107)
Replace main fuel filter cartridge.
tion see: 5.9.3 Replacing main filter - SL105,
page 117) .
Maintenance
Service level definition
(For more information see:
.
(For more
.
(For more
.
.
(For more information see:
.
(For more informa-
79