Electronic Controller; Function Table - Daikin LXE10E-A4 Service Manual

https://daikin-p.ru

3. ELECTRONIC CONTROLLER

3.1 Function table

GDECOS 3c (Daikin Electronic Controller Operation System)
No. Function division
1 Control function
2 Initial setting
3 Setting
4 Indication
(Display panel)
5 Self-diagnosis and
automatic back-up
• Temperature control
• Defrosting control
• Humidity control
• With/without optional equipment (USDA, humidity) and horse power selection
• Chartless function setting
• Temperature
• Defrosting interval
• Humidity
• [PC] --- Header information set of data logger
• Operating mode (compressor running, defrosting,
in-range temperature, dehumidifying)
• Alarm
• Return air temperature/set point temperature
• Supply air temperature/set point temperature
• Defrosting interval
• Inside humidity/set point humidity
• Ambient temperature
• High pressure
• Low pressure
• Power supply voltage
• Total operating current
• Compressor operating current
• Evaporator inlet temperature
• Evaporator outlet temperature
• Discharge gas temperature
• Compressor suction gas temperature
• Suction modulating valve opening
• Electronic expansion valve opening
• Return air temperature (during PTI only)
• Supply air temperature (during PTI only)
• Pulp temperature (USDA #1, #2, #3)
• Cargo temperature
• Sensor Return air temperature sensor
Supply air temperature sensor
Ambient temperature sensor
High pressure sensor
Low pressure sensor
Voltage sensor
Current sensor
Evaporator inlet temperature sensor
Evaporator outlet temperature sensor
Discharge gas temperature sensor
Compressor suction gas temperature sensor
Humidity sensor
Pulp temperature sensor
Cargo temperature sensor
Data recorder sensor
• High pressure switch
• Solenoid valve/hot gas modulating valve (leakage check)
• Long defrosting
• Over-voltage
3-1
(Note) [PC]: Functions using personal computer
Function DECOS3c


Optional











Optional













Optional
Optional











Optional
Optional
Optional
Optional