Motor And Feedback Connectors - Aerotech PRO22SL Hardware Manual

3.1. Motor and Feedback Connectors

3.1. Motor and Feedback Connectors
Stages equipped with standard motors and encoders come from the factory completely wired and
assembled.
IMPORTANT: Refer to the other documentation accompanying your Aerotech equipment.
Call your Aerotech representative if there are any questions on system configuration.
IMPORTANT: If you are using standard Aerotech motors and cables, motor and encoder
connection adjustments are not required.
The protective ground connection of the PRO225SL/SLE provides motor frame ground protection only.
Additional grounding and safety precautions are required for applications requiring access to the stage
while it is energized. The System Integrator or qualified installer is responsible for determining and
meeting all safety and compliance requirements necessary for the integration of this stage into the final
application.
DANGER: The protective ground connection must be properly installed to minimize the
possibility of electric shock.
DANGER: The stage controller must provide over-current and over-speed protection.
Failure to do so could cause electric shock or damage to the equipment.
30
PRO225SL/SLE Hardware Manual
www.aerotech.com