Figure 2-1: Lifting Features - Aerotech PRO22SL Hardware Manual

2.1. Unpacking and Handling the Stage
Lifting Features
The lifting kit includes four eyebolts and four standoffs. Thread the eyebolts onto the standoffs and
thread the standoffs into the stage base. Remove the lifting hardware by turning a wrench on the flats
of the standoffs (see
attached to the lower axis. The lifting hardware must be removed before the stage can be operated.
20
Figure 2-1). If the stage is part of a multi-axis system, the lifting hardware should be
Figure 2-1:
PRO225SL/SLE Hardware Manual
Lifting Features
www.aerotech.com