Related Parameters; Power-On Sequence - Fuji Electric ALPHA7 Series Instruction Manual

3.5 Related Parameters

Parameter Name
SF00 SS1 level
SF01 SS1 timer
SF02 SS1 deceleration time
SF03 SS1 upper limit width
SF04 SS1 monitoring mode
SF05 SLS level
SF06 SLS timer
SF07 SLS deceleration time
SF08 SLS upper limit width
SF09 SSM selection
SF10 SSM level
SF11 SBC function selection
SF12 SIA terminal function selection
SF13 SIB terminal function selection
SF14 Motor reference speed
SF15 The upper limit speed latency
SF16 For manufacturer
SF17 Encoder selection
SF18 Restart selection
SF19 For manufacturer
SF20 EDM1 output selection
SF21 EDM2 output selection
SF22 Safety option ID
3.6 Power ON Sequence
This module conducts an initial diagnosis of internal circuits when the power supply is started. The diagnosis time will vary
depending on the safety functions used, and therefore caution is required. The maximum length of time from the point the
control power is turned ON until initial diagnosis is complete is 4.5 seconds. The fewer the safety functions used, the shorter
the time.
Turn ON the external power supply (24 VDC) connected to this option before turning ON the servo amplifier power supply. If
the servo amplifier starts up with the external power supply OFF, a circuit error will be determined by the safety circuit
self-diagnosis function, and an alarm will occur.
Setting range
0 to 6000 [r/min]
0.01 to 99.99 [s]
0.01 to 99.99 [s]
0 to 6000 [r/min]
0: Speed monitoring, 1: Time monitoring
100 to 6000 (r/min)
0.01 to 99.99 [s]
0.01 to 99.99 [s]
0 to 6000 [r/min]
0: Not used, 1: Used
0 to 6000 (r/min)
0: Disable, 1: Enable
0: No selection, 1: SS1, 2: SLS, 3: SBC_FB
0: No selection, 1: SS1, 2: SLS, 3: SBC_FB
1 to 6000 [r/min]
0.00 to 99.99 [s]
-
0: Not recommended, 1: Recommended
0: Disable, 1: Enable
-
0: Pattern F, 1: Pattern Y, 2: SS1 operation
3: SLS operation, 4: SBC operation
0: Pattern F, 1: Pattern Y, 2: SS1 operation
3: SLS operation, 4: SBC operation
0 to 9999 (BCD code)
Default value
(Factory default)
150
10.00
1.00
150
0
150
10.00
1.00
150
0
150
0
0
0
1500
1.00
-
1
1
100
0
1
0000