Sam4s NR-500 Series Service Manual page 21

3-2 B. RS-232C Serial Cable Installation
1. Connect the RS-232C serial cable to the RS-232C serial port on the right side of ECR.
2. Secure the serial cable with screws.
3. Connector the other end of the RS-232C serial Cable to your host computer.
3-2 C. Options
No. Item
1 Water Proof
2 Memory
3 Pulley Winding
3-2 D. Supplies
No. Item
1 Paper Roll
2 Mode Key
3 User Manual
4 Spool
SAM4S NR-500 SERIES
All manuals and user guides at all-guides.com
Figure 3-3 Cable Installation
Description
Raised Keyboard (Option)
SRAM 4MBITs (4MBITs * 1)
Spool motor & Pulley
Table 3-1 Option
Description
1 EA (1-station)
2 EA (2-station)
VD, REG, Z, P, C
1 EA
1 EA (2-station only)
Table 3-2 Supplies
3 Installation and Operation
(On Main PBA) Factory option
Factory option
Remark
Remark
3-3