Autel Robotics Dragonfish Pro Quick Start Manual page 4

Battery
Hide thumbs Also See for Dragonfish Pro:
Table of Contents

Advertisement

Intelligent flight battery function
The intelligent flight battery has the
following functions:
Storage self-discharge protection
If the battery is stored in a high tempera-
ture environment or is not used for � days
and has a high charge, the self-discharge
protection will be activated. The battery
will automatically discharge to a safe level.
This is the default setting, and the
discharge process takes �-� days. Although
the battery has no indication during the
self-discharge cycle, you will notice that the
battery slightly heats up, which is normal.
The discharge threshold can be customized
using Autel Voyager.
Low power protection
If the battery power is low, the battery will
automatically enter sleep mode to prevent
over-discharge. In this mode, the battery
does not respond when you press the
power button. To wake up the battery,
connect it to a charger.
Charging temperature detection
If the temperature is lower than �°C (��°F)
or higher than ��°C (���°F) during
charging, the battery will stop charging.
Overcurrent protection
If the charging current exceeds ��A, the
battery will stop charging.
Overcharge protection
The battery stops charging automatically
once fully charged.
Balance protection
The voltage of each battery cell is kept
balanced to prevent overcharging or over
discharging.
Over discharge protection
When the battery is not in use, the battery
will automatically cut off the power output
function after the self-discharge cycle is
completed. This function is disabled during
flight.
Short circuit protection
Once a short circuit is detected, the power
supply will be cut off.
Power saving mode
If there is no operation for �� minutes, the
battery will shut down.
Communication
When in use, the aircraft will maintain
synchronization with the battery to
provide real-time information, including
voltage, capacity, current, and tempera-
ture.
Ultra-low energy consumption mode
To save power, this mode will be activated
when the battery is low and has not been
charged for � day. After connecting the
charger, the battery will resume normal
functions.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dragonfish Pro and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents