LED indicator warning description
LED1
LED2
-The indicator light flashes
Caution
If the battery overheats while charging, the LED2 indicator will flicker. If connecting to
the charger, the battery will recharge automatically after the normal temperature is
detected. Do not unplug the charger.
Battery level indicator status (during charging)
LED1
-The indicator light is always green
Specifications
Single Battery Power
Single Battery Charging Time
Standard Voltage
Battery Model
Ideal Storage Temperature
The Autel Robotics Customer Service Team is always ready to help.
Email: support@autelrobotics.com
LED3
LED4
The charging temperature is too high or too low.
The charging current is too high and has
caused a short circuit.
Over current, overload or short circuit
occurred during discharge.
LED2
LED3
Warning note
-Off
Battery level
LED4
�~��%
��~��%
��~��%
��~���%
-The indicator light flashes green
822.363 Wh
120 min
46.2 V
DF15_17800_4620
22℃ to 28℃
Need help?
Do you have a question about the Dragonfish Pro and is the answer not in the manual?