TROUBLESHOOTING
Error Code
Bills get damaged /
Machine runs slow
Bills eject from the
machine / Display
shows miscount
SPECIFICATIONS
Model
Power
Power Consumption
Temperature Range of Operation
Hopper Capacity
Counting Speed
Accepted Note Size
Accepted Currency
Display Range
Dimensions
Net Weight
Reason
Hopper Tension is too tight
Hopper Tension is too loose
L:50~100mm (1.9 - 3.9 in) W:90~190mm (3.5-7.5 in)
Counting: 4 Digits / Batch Counting: 3 Digits
12.79" W x 12.20" D x 10.35" H (325 x 310 x 263 mm)
Solutions
To loosen the tension, please turn the bill
thickness adjuster (located on the back of
the machine) clockwise. Repeat bill counting
and adjust if the problem continues.
To tighten the tension, please turn the bill
thickness adjuster (located on the back of
the machine) anti-clockwise. Repeat bill
counting and adjust if the problem
continues.
RBC-ED350
AC 100V~240V 50/60 Hz
≤90W
32~104 °F / 0~40 °C
500 notes
900 / 1,200 / 1,500 bills per minute
USD
9.92 lbs. / 4.50 kgs
10