Related Manuals for Royal Sovereign RBC-4500
Summary of Contents for Royal Sovereign RBC-4500
- Page 1 Owner's Manual BILL COUNTER WITH VALUE COUNTING RBC-4500 Please read and retain these instructions. Royal Sovereign International, Inc. To register your product, please go to www.royalsovereign.com...
-
Page 2: Table Of Contents
Thank you for purchasing the Royal Sovereign Bill Counter with Value Counting, RBC-4500. This manual will provide you with safety information, instructions for optimal use, and proper care and maintenance for your product. Please read this manual carefully before operating. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS When using this machine follow these basic safety precautions to reduce risk of fire, electric shock, orinjury. WARNING Only use the power cord that comes with the machine. Using a different power cord may result in electric shock, fire, or cause serious damage to the machine. Plug the power cord into a properly grounded wall outlet. Do not use the machine if the power cord is damaged. -
Page 4: Box Contents & Product View
BOX CONTENTS Bill Counter Power Cord PRODUCT VIEW Hopper Digital Display Control Panel Bill ReceivingVanes... -
Page 5: Quick Start Guide
QUICK START GUIDE 1. Plug the power cable into the back of the unit and into the wall power outlet. 2. On the back of the machine, flip the power switch to power on. 3. The machine will go through an automatic self-diagnostics test to ensure accurate bill counting. -
Page 6: Control Panel
CONTROL PANEL Counterfeit Detection (CF Key) UV Counterfeit Detection Counterfeit bills often use white or bleached paper, which will glow under ultraviolet light. To use the ultraviolet counterfeit detection press the “CF” button once. When the UV detector finds a counterfeit bill, the machine will stop counting to allow removal of the counterfeit bill and display the error code on the preset display. -
Page 7: Product Operation
PRODUCT OPERATION Attach power cable to back of machine, plug into a three prong outlet, and turn power switch on. The unit will conduct an automatic self-diagnostic test to ensure accurate counts. After five seconds of the counting wheels spinning, the screen will display a "0". If there is a problem, the preset display will show an error code. - Page 8 PRODUCT OPERATION (CONTINUED) Counterfeit Detection Methods All methods are automatically on when the unit is powered up. To manually turn off any or all methods see (CONTROL PANEL - LOCATED ON PAGE 5.) Menu Settings Press “MENU" key, you will see: 1. SPEED SET 2. LEVEL SET 3. WARN COUNT 4. DATE&TIME 5. BEEP 6.PRINTER INTERFACE, press “...
-
Page 9: Maintenance Of The Machine
If necessary, the glass surfaces of the detectors may also be wiped with a soft cloth dampedwith alcohol. To get the best results out of your bill counter, Royal Sovereign recommends using Royal Sovereign Cleaning Cards (RBC-CLN) to remove dirt, dusts, oils, and other contaminates from bill counters. With the machine on, simply run the cleaning card through the machine like a bill. -
Page 10: Troubleshooting
Hopper plate sensor Main motor and/or vane Clean the hopper with a soft brush, use compressed air to clear is not working out the dust, or use a Royal Sovereign Cleaning Card. motor does not run correctly Counting sensor is Display shows “0”... -
Page 11: Error Code Display And Solutions
ERROR CODE DISPLAY AND SOLUTIONS The display may show some error code in counting, which means there are some problems with the machine. Refer to the chart below to solve the error. Error Code Trouble Position UV Sensor UV CHECK FAIL Left Counting Sensor NL CHECK FAIL Right Counting Sensor... -
Page 12: Warranty
ONE YEAR LIMITED WARRANTY Royal Sovereign International, Inc. warranties this product to be free from defects in material and workmanship for a period of one (1) year. This warranty is extended to the original purchaser only. This warranty only covers products that are properly installed, properly maintained, and properly operated in accordance with the instructions provided.