Table of Contents
Advertisement
Wheels
For wheel cleaning, moisture or icing and
snow melting salt may reduce braking effect,
which may have the risk of accident.
You can prevent braking abrasive dust dirt and snow
melting salt from attaching to the wheels by cleaning the
wheels. Braking abrasive dust not easy to remove may be
cleared with a non-acid rim cleaner.
Light Alloy Wheels
In order to keep good appearance of the light alloy wheels,
regular care is required for it, if snow melting salt and
braking abrasive dust are not washed off regularly, the light
alloy will be eroded.
Please be sure to use a non-acid special cleaner for cleaning.
Do not use paint polishing agent or other products
containing abrasives for wheel care, if the protective
cover of paint has been damaged (such as damages after
being stuck by stones), you must immediately repair the
damaged part.
254
Maintenance
Protective Bottom Cover
Never add any protective bottom cover to the
exhaust gas catalytic purifier of exhaust pipe
or the heat shield since it may ignite these
substances and cause fire hazards.
The bottom of the vehicle is coated with a special durable
protective material, which can be safe against the effects of
chemical and mechanical factors. But we recommend you
to inspect the bottom of the vehicle and the protective
layer of the chassis on a regular basis since the protective
layer can not be protected against damages when the
vehicle is in service, and it is preferable to inspect once
before the cold season starts and after it comes to an end.
Advertisement
Table of Contents
