MG GT Manual page 190

Applying the EPB
The EPB can be switched on when the vehicle is still.
Always activate the EPB every time you leave or park the
vehicle.
• Pull the EPB switch upward until the indicator in the EPB
switch illuminates.
• If the indicator lamp in the EPB switch and the indicator
lamp in the instrument pack illuminates, it indicates
that the EPB is applied.
• If the EPB MIL in the instrument pack stays on, it
indicates that the EPB has a fault. Please contact an MG
Authorised Repairer as soon as possible.
Note: Audible motor noise may be heard when
applying or releasing the EPB.
IMPORTANT
• In the event of a flat battery or power failure, it is not
possible to apply or release the EPB. At this time, use
booster cables to start the engine in an emergency.
Please refer to "Emergency Starting" in the section
of "Emergency Information".
176
Starting & Driving
Releasing the EPB
• Place the START/STOP Switch in the ON/RUNNING
position, depress the brake pedal, and press the EPB
switch.
• If the indicator in the EPB switch and the indicator
in the instrument pack are extinguished, the EPB is
released.
Start Assist
The EPB can predict the driver's intention and
automatically release the EPB.
If the driver's seat belt is fastened, the engine is started, D
or R gear is engaged and the accelerator pedal is pressed in
order to pull away, the EPB will be automatically switched
off.
Emergency Braking Function
Inappropriate use of EPB can lead to
accidents and injuries.
the EPB for vehicle braking during vehicle
running, unless in an emergency.
DO NOT apply