Advertisement
36
Position the FootRest on the bike and loosely thread the two
8 mm bolts through the front mounting plate and into the
threads on the frame. To hold up the rack while you
thread in these bolts, you may need an extra hand. The
bottom portion of the rear clamp should fall underneath the
RearRack.
38
Go back to the front bolts on the mounting plate. Tighten
these bolts down using a 5mm Allen wrench.
37
Attach the top portion of the rear clamp, securing the rear
portion of the FootRest to the bottom bar of the RearRack.
Loosely thread two 4mm bolts with washers into the top of
the clamp. Do not tighten the bolts completely at this time.
39
Once the mounting plate bolts are tight, evenly tighten the
bolts on the rear clamp using a 4mm Allen wrench until the
FootRests are securely attached to the frame. You can now
tighten the bolts securing the RearRack to the frame
11
Advertisement
