Xerox VersaLink B71 Series User Documentation page 63

3. Connect the printer to your computer with a USB cable or to the network with an Ethernet cable.
4. Power on the printer:
a. Open the front door, then press the main power switch to the On position.
b. At the printer control panel, press the Power/Wake button.
If the printer was installed previously in a wireless network environment, it could retain setup and
configuration information from that environment. To prevent the printer from attempting to
connect to the previous network, reset the wireless settings. For more information, refer to the
System Administrator Guide at www.xerox.com/office/VLB71XXdocs.
63