Xerox VersaLink B71 Series User Documentation page 229

Symptom
Envelopes are wrinkled or creased when printed.
The top margin is incorrect.
The printed surface of the paper is bumpy.
C C o o p p y y a a n n d d S S c c a a n n P P r r o o b b l l e e m m s s
If the copy or scan quality is poor, refer to the following table.
If the problem persists, for online support information, go to www.xerox.com/office/VLB71XXsupport.
Solutions
Check if the crease is within 30 mm (1.2 in.) of the
four edges of the envelope.
• If yes, it is printing as expected. Your printer is not
faulty.
• If not, take the following actions:
Ensure that envelopes are loaded properly in the
bypass tray. For details, see
the Bypass Tray.
Follow the guidelines for printing on envelopes.
For details, see Guidelines for Printing
If the problem persists, use a different size
envelope.
• Ensure that the paper is loaded properly.
• Ensure that the margins are set correctly in the
application you are using.
• Adjust the paper registration. For details, see
Adjusting Paper Registration.
1 Print a solid image over the entire surface of one
sheet of paper.
2 Load the printed sheet into the tray with the
printed side face down.
3 Print five blank pages to remove debris from the
fuser rollers.
Loading Envelopes in
Envelopes.
229