Proxim Tsunami 800 Series Hardware Installation Manual page 37

: You should use a straight through Ethernet cable between the PoE and the device. When you use a 4-pair cross
over Ethernet cable, the reload functionality gets activated and forcibly deletes the operating image.
2.3.1.2 Grounding Point
To protect the device against lightning or ESD events, you must ground the device properly. To ensure proper grounding, use
the grounding point situated at the bottom corner of the device and the grounding screw (M4 thread size) provided to attach
a ground wire of atleast 12 AWG stranded to the device.
2.3.2 Product Package
Each shipment includes the items listed in the following table. Please verify that you have received all the parts in the
shipment prior to the installation.
What's in the Kit
MP-826-CPE-50
PoE Injector with Country specific Power Cord
WD - US, UK, and EU power cords
US - US power cord
Connector Weather Proofing Kit
Pole Mounting Kit
The mounting kit supplied with 8xx /
8xxx series can also be used with this
device. Please refer "Step:6 Assemble
Mounting Hardware" of
mounting procedure.
Grounding Kit
®
Tsunami 800 and 8000 Series - Hardware Installation Guide
section for step-by-step
800 Series - Hardware Overview and Installation
Image
37