Advertisement
If you want back to main menu, please press MENU button.
4.3
LED display setting
Select the LED option, press ENTER button to confirm your selection. You
can see the current ON/OFF status of LED display now. You can change its
status by press UP/DOWN button. Then press ENTER button to confirm your
selection. If you choose OFF, than the LED display will close without any
operation for I min. Wait for 30 seconds, it will return to main interface. If you
want back to main menu, please hold MENU button for 1 second.
4.4
LED display direction setting
Select DISP option, press ENTER button to confirm your selection. Select
the DISP / DSIP by press UP/DOWN button. Press ENTER button to confirm
your selection. Wait for 30 seconds, it will return to main interface. If you
want back to main menu, please hold MENU button for 1 second.
4.5
Test setting
Select TEST option, press ENTER button to confirm your selection. The
flash indicator will light up and the unit will test automatically. Wait for
several seconds self-test, it will return to main interface. If you want back to
main menu, please hold MENU button for 1 second.
4.6
Temperature
Select the LEMP, press ENTER button and the display will show the
temperature of unit. Wait for 30 seconds, it will return to main interface. If
you want back to main menu, please hold MENU button for 1 second.
7 A
Advertisement
